Appraisal for disputed property claims · All 36 Oregon counties info@oregoninsuranceappraiser.com+1 (844) 537-1427
Free calculator

Roof Pitch and Squares Converter for Insurance Claims

Steep Oregon roofs hide a lot of surface area. Enter the footprint and pitch to estimate true roof squares, see the pitch angle, and compare the result with the squares on the insurer’s estimate.

Roof pitch & squares converterCheck the insurer’s count
Measurement method
Roof squares (before waste)0
Pitch angle0°
Pitch multiplier1.000
Roof surface area0
Squares with waste0
Shingle bundles (3 per square)0
Difference vs. insurer’s squares—
Rough replacement cost—

For planning only. Results depend on the figures you enter and your policy’s terms. They aren’t a quote, an appraisal or legal advice.

The math

A sloped roof has more surface than the footprint under it. The pitch multiplier is √(1 + (rise ÷ 12)²): an 8/12 roof is about 20% larger than its footprint and a 12/12 roof about 41% larger. The converter also shows the pitch as an angle in degrees.

Comparing with the estimate

  • Find the total roof squares and the waste percentage on the insurer’s estimate and enter the squares.
  • A difference of more than 5–10% deserves a closer look at the measurements.
  • Check for steep-roof and high-roof charges on steeper and two-story sections.
  • Make sure starter, ridge, drip edge, underlayment and flashing appear as separate items.

Limits

Roofs with several pitches, dormers and valleys need to be measured plane by plane. Use this as a sanity check alongside a field or aerial measurement.

Questions about this tool

What is a roofing square?

100 square feet of roof surface. Many two-story Oregon homes fall somewhere between 20 and 40 squares.

Why does the waste factor change?

Hips, valleys and dormers require more cutting, so more material is wasted.

More free calculators

Want a professional to check the numbers?

Send us your estimate and we’ll review it line by line.

Call nowFree review